Sea-doo 2011 RXX, Operator'S Manual, Page: 9 / 14

7
PRE-OPERATION CHECKS SPECIFIC TO RXX
MODEL
NOTE: This section is in addition to the
other applicable information which is
already specified in the
2001 Sea-Doo
Operator’s Guide .
Hydraulic VTS
(Variable Trim System)
Squeeze VTS lever to check nozzle
movement. When releasing lever, noz-
zle should automatically return to its
center position.
SPECIAL PROCEDURES SPECIFIC TO RXX
MODEL
NOTE: This section is in addition to the
other applicable information which is
already specified in the
2001 Opera-
tor’s Guide .
Jet Pump Water Intake and
Impeller Cleaning
On-Beach Water Cleaning
Rotate the watercraft clockwise (seen
from rear) to its right side for cleaning.
Capsized Watercraft
Rotate the watercraft counterclock-
wise (seen from rear).
F06L11Y
Max. 90°
F06L0DZ
smo2001-004a.book Page 7 Wednesday, December 20, 2000 9:54 AM
www.SeaDooManuals.net