Page 18
Cooling/Heating/Fan only Operation
Start the function:
Ensure unit is plugged and power is available. The OPERATION lamp on
the display panel of the unit starts flashing.
1. MODE button
Press to select COOL, HEAT or FAN ONLY.
2. TEMP/TIME button
Set the desired temperature, the most comfortable temperature is
between 70
℉
to 82
℉
.
3. FAN SPEED button
Press to select “AUTO” “LOW” “MED” and “HIGH”.
4. ON/OFF button
When the remote control is off, push this button to start the air conditioner.
Stop the function:
ON/OFF button
Push this button again to stop the air conditioner.
NOTE
: The FAN ONLY mode does not control temperature. The
temperature cannot be set on FAN ONLY mode.
Dry Operation
Start the function:
Ensure unit is plugged and power is available.
The OPERATION lamp on the display panel of the indoor unit starts
flashing.
1.
MODE button
Press to select DRY.
2.
TEMP/TIME button
Push the
“TEMP/TIME” button to set the desired temperature from 70
℉
to
82
℉
.
3.
ON/OFF button
When the remote control is off, push this button to start the air conditioner.
Stop the function:
ON/OFF button
Push this button again to stop the air conditioner.
NOTE
: The fan speed cannot be adjusted when the unit is in AUTO or
DRY mode.