Page 9
Change Temperature Setting
Adjust Fan Speed
Change Temperature:
Press or hold either Up (
▲
) or
Down (
▼
) button until the desired
temperature set point is seen on
the display.
Temperature range is 62°F (17°C)
to 86°F (30°C) in 1°F (1°C)
increments.
When in Fan Only mode, display
will indicate room temperature,
otherwise it will show set
temperature.
Select Fan Speed
Used to select the Fan speed in
four steps
–
o
Auto
o
Low
o
Med.
o
High
Each time the button is pressed,
the fan speed mode is shifted.
If the DRY mode is selected the
fan will operate in Low speed.