SDX Audio SPOT 14.4 User Manual Download

Page: 3 / 40

Getting Started

Getting Started - Page

- Page 33

SPOT 14.4

SPOT 14.4 User's Guide

User's Guide

38GDE00001SCF - Issue 4 (11/96)

Getting Started

Using this Guide

This guide aims to make installing your SPOT easy. It does not cover all

the software that you can use with SPOT, since the number of data, fax,

voice and auto-dial applications is just too large. Those applications

included with your SPOT each come with their own on-line help and/or

printed manual. Please refer to these for assistance with those specific

programs.

Quick Start

Quick Start: To install your SPOT, go page

: To install your SPOT, go page 77..

PC Requirements

SPOT requires a PC with the following specification:
Windows 3.1:

Windows 3.1:

– 486SX 25MHz processor minimum.
– 486DX 50MHz processor recommended.
– 4MB RAM.
– A free 9-pin or 25-pin D-type serial port (16550 UART type

recommend).

Windows 95

Windows 95::

– 486DX 50MHz processor minimum.
– 75MHZ Pentium processor recommended.
– 8MB RAM.
– A free 9-pin or 25-pin D-type serial port (16550 UART type

recommend).

Summary of Contents for SPOT 14.4









































Search results

Summary of Contents for SPOT 14.4

Reviews:

Related manuals for SPOT 14.4

Brands by name

Popular brands

SDX Audio SPOT 14.4, User Manual

Search results

Summary of Contents for SPOT 14.4

Reviews:

Related manuals for SPOT 14.4

Brands by name

Popular brands