«
APPENDIX E: SAFETY INFORMATION » |
59
Avertissements
Ce symbole avertit l'utilisateur que la tension non isolée à l'intérieur de l'appareil peut être
suffisamment importante pour provoquer un choc électrique. Par conséquent, tout
contact avec les éléments se trouvant à l'intérieur de cet appareil peut être dangereux.
Ce symbole avertit l'utilisateur que des informations importantes concernant le
fonctionnement et l'entretien de l'appareil ont été incluses. Par conséquent, il convient de
les lire attentivement afin d'éviter tout problème.
AVERTISSEMENT
Pour éviter tout risque d'incendie ou de choc électrique, n'exposez pas cet appareil à la pluie ou à
l'humidité.
AVERTISSEMENT
N'utilisez pas la fiche polarisée de cet appareil avec une rallonge ou autres prises sauf si les broches
peuvent être complètement insérées.
AVERTISSEMENT
Ne pas ouvrir le boîtier de l'affichage car il contient des composants sous haute tension. Confiez
toute réparation à un personnel qualifié.
ATTENTION
Pour réduire le risque de choc électrique, assurez-vous que le cordon d'alimentation est débranché
de la prise murale. Pour débrancher complètement l'appareil, débranchez le cordon d'alimentation
de la prise secteur. N'enlevez pas le couvercle (ou le dos). Ne contient aucune pièce réparable par
l'utilisateur. Confiez toute réparation à un personnel qualifié.
ATTENTION
Veuillez utiliser le cordon d'alimentation fourni avec ce moniteur conformément au tableau
ci-dessous. Si aucun cordon d'alimentation n'est fourni avec cet équipement, contactez votre
fournisseur. Pour tous les autres cas, veuillez utiliser un cordon d'alimentation correspondant à la
tension CA de la prise de courant et approuvé par la norme de sécurité de votre pays et conforme
à celle-ci.
Amérique du Nord
(USA/Canada/
Taïwan)
Union européenne ROYAUME-UNI
Chine
Japon
Forme de
la fiche
Tension
120 (110 à Taïwan)
230
230
220
100
Lors de l'utilisation d'un affichage nécessitant une alimentation CA 125-240V, veillez à utiliser un
cordon d'alimentation correspondant à la tension d'alimentation de la prise de courant CA utilisée.
Le cordon d'alimentation doit être raccordé à une prise de courant avec mise à la terre.