Operation & Maintenance Manual
──
LG946L Wheel Loader
78
rules on the nameplate of the antifreeze.
After cold weather:
After the weather is warm, the relative parts should use the proper engine oil, fuel and hydraulic
oil that are appropriate for the temperature.
3.6 Oil and Fuel Supply
3.6.1 Engine Oil Supply of Engine
①
Oil Level Checking
△
!
NOTICE
An oil level check must be executed 15 minutes before engaging the
engine, or after stopping the engine.
z
Park the machine on level ground, and put the transmission lever in the
neutral
(“
N
”)
position. Pull the brake valve manual control handle or press the parking brake switch to
brake, and put blocks in front and back of tires.
z
Open the side door on the right side of the engine cover.
z
Pull the dipstick out, and wipe it clean with a cloth. Insert the dipstick back, and pull it out
again to check the oil level (at least twice).
The oil level is normal if the oil level is between ‘H’ and ‘L’ limit of the dipstick; If the level
is lower than the ‘L’ limit, oil should be added by the oil adding port.
z
Put back the oil dipstick and close the
profile door of the
engine. For choosing the appropriate oil please refer to
CHAPTER IV 2.2 Oil
Selection
.
②
Engine Oil Replacement
z
Park the machine on level ground, and put the transmission lever in
neutral
(“
N
”) position.
Pull the brake valve manual control handle or press the parking brake switch to carry out
braking, and put the blocks in the front and back of the tires. Start the engine and run at idle
