Operation & Maintenance Manual
──
LG946L Wheel Loader
58
placed on the ground and the bucket is in the bucketing position in order to realize the
set level automatically function and increase the efficient of the whole vehicle.
Lock automatically function:
When leveling the ground, place the control handle in
the floating position, and the control handle is locked by the electromagnetic force to
realize the lock automatically; Take the control handle from the floating position, it
returns to the neutral position automatically to increase the efficient of the whole
vehicle.
z
Brake Pedal
The Brake Pedal controls the brake of the vehicle. Refer to 1.1 General View of Controls and
Gauges Figure3-1 and 3-2 in this chapter.
z
Accelerator Pedal
This pedal controls the acceleration of the engine. Refer to 1.1 General View of Controls and
Gauges Figure3-1 and 3-2 in this chapter.
The engine speed can be freely regulated between idle and full speed.
z
Parking Brake Switch
This switch is on
the right operator
box and it is used
for the parking
brake. Pull this
lever to engage
the parking brake. Turn the switch slowly until it
springs back to release the parking brake.
z
Flameout Control Soft Knob (if assembled)
This soft knob is on the right operator box at the right side of cab. Pulling this knob up will put
out an engine flame.
1.2.5 Cab Door Locking Bar
z
Outside Cab Locking Bar:
Open the
left and right door to 180° and the
orientation lock on the door will touch