Operation & Maintenance Manual
──
LG946L Wheel Loader
53
system. The basic type is not mounted with pre-heat system, the user can select to install.
OFF Position
Insert or remove the key in this position. Turn the key to this position to cut off the electric
power.
ON Position
This position is used to turn on the electric system. Keep the key in this position when the
engine is running.
START Position
This is the engine-start position. Keep the key at this position during starting. After the
engine has started, immediately pull out the key, or it will return to
ON
position automatically.
z
Radio and CD Player Control Panel (if assembled)
This switch is at the right side of the ceiling cab, and for the details please refers to
Radio
and CD Player Assemble & Operation Manual.
If the radio is not assembled, the connecting
line of radio is reserved, please assemble it according to the electric principle diagram by
authorized person of vehicle or construction machinery electric.
z
Turning Switch (if assembled)
Push this switch forward, and the left turning lamp lights. Push this switch backward, and
the right turning lamp lights. Refer to 1.1 Control System and the Gauge Figure 3-1 and3-2 in
this chapter.
z
Rocker switch
The rocker switch at the right side of seat. The rocker
switch can be referred to 1.1 Control System and the
Gauge Figure 3-4 in this chapter. When the start
switch is at
ON
position, the unit heater, water
spraying bottle, rear headlight, front headlight, rear
lighting lamp, front lighting lamp, back lighting lamp,
warning lamp and rain wiper will be controlled separately by this switch.
z
Unit heater switch
Press bottom side, the unit heater will work; press top side, the .unit heater will stop.