Operation & Maintenance Manual
──
LG946L Wheel Loader
35
z
To avoid the leakage of oil and to prevent the high-pressure liquid from spraying and hurt
somebody, the damaged hose should not be allowed to repair and use, instead, it should be
replaced with the new component as a whole one.
z
Make sure all the pipe clamps, protective board, and anti-heat cover are installed properly to
prevent vibration and overheating due to friction with other parts.
z
Choose proper container to hold liquid when replacing the hydraulic oil of the hydraulic
system and when cleaning the parts. Please refer to
8.20 Waste Materials,
in this
chapter for the methods to deal with waste liquid.
8.13 Preventing Fire
z
Stop the engine before adding fuel. Do not smoke and keep fire away while adding fuel.
z
Keep fire away from the storage place of fuel, grease
or other flammable materials.
z
Clean the flammable substances on the machine such
as fuel, grease oily cloth or other flammable
materials.
z
Keep fire away from the storage battery because
explosive gas may be generated. Strictly follow the
program in this user manual to maintain the storage
battery.
z
Make sure there are no flammable materials, such as dry grass and old paper, near the high
△
!
NOTICE
Please replace these parts in the following conditions:
z
Connectors are broken or leaking.
z
Outside of soft pipe is abrasive or cracked, and the steel wire of the
strengthening layer is bare.
z
Local of soft pip is upheaval.
z
Soft pipe is obviously torqued or staved.
z
Steel wire of strengthening layer penetrates the outside layer.
z
The end connectors are misplaced.
