Operation & Maintenance Manual
──
LG936 Wheel Loader
22
z
Let the hook of one machine to be towed at the same line with the towing part of the other one.
6 SAFETY OPERATION
6.1 Keep Good Operation Habit
z
Be seated with safety belt (if assembled) all the time
during operation. The machine should be at the
controllable state.
z
Operate the working equipment control lever (or handle) properly, prevent misoperation.
z
Examine and listen to the exceptions carefully, and report immediately. Do not repair at working
state.
z
Make sure, do not overload, otherwise it is dangerous.
Shandong Lingong construction machinery Co. Ltd
houlds no resposibilities duce to overload.
z
It is dangerous and wrong method to run into the
materials with high speed, under which condition the
loader and the operator may be hurt and the product
also.
z
Keep perpendicular angle during load and unload
materials. If work from side direction, the Steering
cylinder, differential carriers may be hurt, and the
machine may be unbalanced. This is not allowed.
z
Go to the load and unload materials first to make sure
the conditions first, and then work.
z
Do not break the working equipment when work in narrow area such as tunnel,
overbridge,
