TB-9075
Page 1 of 3
© 2017 DESCO INDUSTRIES, INC.
Employee Owned
SCS
- 926 JR Industrial Drive, Sanford, NC 27332
East: (919) 718-0000 | West: (909) 627-9634 • Website:
497AJL HEPA Vacuum
Installation, Operation and Maintenance
January 2017
USER GUIDE TB-9075
HEPA Vacuum.
Grounding Instructions
This appliance must be grounded. If it should
malfunction or break down, grounding provides a
path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped
with a cord having an equipment-grounding conductor
and grounding plug. The plug must be used with an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
This appliance is for use on a nominal 120-volt circuit.
(Check inside each vacuum model motor lid for specific
information.) Make sure the appliance is connected to
an outlet having the same configuration as the plug. No
adapter should be used with this appliance.
Any service on this vacuum cleaner should be performed
by an authorized service representative.
This product meets ANSI/ESD S20.20 and is designed
to be used in an ESD protected area; The hose and
accessories are conductive/dissipative so electrostatic
charges will be removed when properly grounded
throught the power cord to electrical outlet ground prong.
Warning:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if
you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the
appliance. If the plug does not fit the outlet, have a
proper outlet installed by a qualified electrician.
Made in the
United States of America
Specifications
Electrical
120VAC, 50/60Hz, 6.0amps
Motor
1 Horsepower
Dimensions
17.8" L x 7.8" W x 9.3" H
(45.2 cm L x 19.7 cm W x 23.5 cm H)
Weight
11 lbs.
Certification
cULus
To Operate
1. Release latches and open lid.
2. Unfasten accessory door and remove vacuum hose,
electrical cord and hose attachments.
3.
Remove filter plug from vacuum inlet (always
replace when repacking for transport).
4. Attach selected accessory to hose. Insert other end
of hose into inlet.
5. Latch lid securely.
6. Insert hooded end of power cord in power cord
receptacle on vacuum.
7. Plug cord into power outlet.
8. Turn on power switch.
HEPA Vacuum.
5
6
