manualshive.com logo in svg

SCS PTC-IIIusb, User Manual

Share
Download
SCS PTC-IIIusb User Manual Download Page 67

6 Commands 

 

54

If the long path option was used for last PACTOR connection or the last MASTER 
connect attempts (exclamation mark before the callsign), all of the following 

Connect

 

commands 

without an argument

 will start a call using the long path option. 

6.22.2

 

Robust-Connect 

A 

Robust Connect

 can be started by prefixing the call sign (argument of a connect 

command) of the distant system with a "%" sign, e.g.: 
 

cmd:

 

C

 %DL1ZAM <Enter> 

 
This is also valid for WA8DED hostmode. In terminal mode the PTC-II(e) will respond 
as following: 
 

*** NOW CALLING DL1ZAM  (ROBUST CONNECT) 

6.22.3

 

AMTOR 

With an active AMTOR prompt the 

Connect

 command starts a connect attempt, trying 

to establish an ARQ link (mode-A). Certainly the AMTOR selcall of the distant station 
has to be entered instead of the callsign. For example: 

C

 

DFCJ

. The station with the 

selcall DFCJ will be called in AMTOR ARQ. If the call is repeated, then the selcall can 
be omitted. 

6.22.4

 

Direct frequency entry 

With starting a PACTOR connect, optional a frequency value (separated by a comma) can 
be entered after the target callsign. This is valid for the connect command in the terminal 
mode (e.g. 

PlusTerm

) as well as in the host mode. 

cmd:

 

C

 dl1zam,3582.60 <Return> 

In this example first of all the PTC will send the frequency information to the TRX, the 
TRX sets the VFO to 3582.600 kHz and starts calling (on this frequency). To use this 
function the transceiver must be capable to be remote-controlled using the TRX remote 
control option of the PTC-IIIusb, utilizing the socket for remote control of the PTC-
IIIusb. The remote control parameter have to be set correctly using the 

TYpe

 command 

of the 

trx:-

menu. 

This notation is very handy for simple callsign lists with the corresponding frequency 
information. The list entries directly can be entered as Connect arguments. Also the 
manual input of the frequencies should be convenient enough. 

6.23

 

CONType 

Default setting: 3 

 

 

 

Parameter: 0  Accepts 

no 

connects 

 1 

Accepts 

only 

normal

 connects 

 2 

Accepts 

only 

robust

 connects 

 3 

Accepts 

all 

connects 

Summary of Contents for PTC-IIIusb


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands