SCS PTC-IIex, Manual

Page: 149 / 220

10 Hostmode
10.4.7 K
Default setting: 0
Parameter: 0 Time stamp switched off.
1 Time stamp for connect and disconnect messages.
2 Time stamp also in monitor.
Switches the time stamp display on and off.
10.4.8 L
Default setting: none
Parameter: X 0… 31, channel.
Requests the link-status, a list of the channel condition being given.
This command is only used by the hostmode program. The user cannot enter this
command.
10.4.9 M
Default setting: N
Parameter: N Monitor switched off.
I Info frames.
U Unproto transmissions.
S Control packets.
C Monitor also while connected.
M
sets which frame types will be displayed in the monitor.
10.4.10 N
Default setting: 10
Parameter: X 0… 255, number of repeats.
Sets the maximum number of repeats, and if this value is exceeded, then the PTC-IIex
gives out the message:
LINK FAILURE with <call>
10.4.11 O
Multiport
Default setting: 7
Parameter: 1 1… 7, Number of unacknowledged packets.
Maximum number of unacknowledged info packets (I frames) in a link. Maxframe also
sets how many packets the PTC-IIex transmits together. The value should be reduced for
bad links.
135