SCS PTC-IIex, Manual

Page: 139 / 220

9 Packet-Radio
3 - Additionally SABM- and DISC-Frames.
4 - Additionally UA- or DM-Frames
5 - Additionally RNR, RJ and FRMR
6 - Additionally Poll/Final Bit, PID and serial numbers
9.6.21 MStamp
Default setting: OFF
Parameter: OFF Time stamp off.
ON Time stamp on.
MStamp
activates the time stamp for packets that are displayed via the monitor.
9.6.22 MText
Default setting: '>>> Welcome...'
Parameter: String of 249 characters, maximum.
Identical to the
CText
-command in the
pac:
-menu, however sets the connect-text for
the PR-mailbox.
The default text is as follows:
>>> Welcome to %'s PTC-IIex Mailbox <<<
Please type H for help.
The
MText
input is done via the normal command interpreter, so a convention for the
<CR> character has to be used: The <CR> is represented within the
MText
string by #.
This would be input like:
pac:
MT
>>> Welcome to %'s PTC-IIex Mailbox <<<## Please type H for help.
<Return>
The same as in
CText
, the % character serves here as a dummy for the appropriate
MYCALL, independent if it is a BBS callsign or the normal MYCALL. The SSID of the
MYCALL is ignored.
For example if DL1ZAM-8 is the BBS-MYCALL, then the PTC-IIex will give the
following message:
>>> Welcome to DL1ZAM's PTC-IIex Mailbox <<<
Please type H for help.
The
MText
always follows the message from the automatic mail notifier , i.e.
"*** NO
new MSG for you
" or "
*** 2 new MSGs for you
" or similar.
The
MText
cannot be turned off.
9.6.23 MYAlias
Default setting: SCSPTC
125