SCS Pactor, Installation Manual

Page: 58 / 61

5. Accessories
5 Accessories
For the
SCS
PTC series the following accessories are available:
•
Professional-Firmware
Firmware with PACTOR-III, PACTOR-IP-Bridge, PACTOR-Free-Signal, Robust-
Connect and much more.
•
Packet-Radio 9k6 cable
Direct connection from VHF/UHF-transceivers with DATA-connector (6 pin Mini-DIN)
to the PTC (5 pin DIN).
Order-No.: 8050
•
ICOM 8 pin cable
ICOM audio cable, PTC 8 pin DIN to ICOM 8 pin DIN (e.g. for M710, IC-735, IC765,
IC-M802 and more).
Order-No.: 8090
•
ICOM 13 pin cable
ICOM audio cable, PTC 8 pin DIN to ICOM 13 pin DIN (e.g. for M706, IC-718)
Order-No.: 8110
•
YAESU Audio cable
PTC 5 pin DIN to YAESU FT-817 6 pin Mini-DIN (e.g. for FT-100, FT-817, FT-897).
Also usable for 1k2 Packet-Radio.
Order-No.: 8120
•
KENWOOD Audio cable
PTC 8 pin DIN to KENWOOD ACC2 13 pin DIN.
Order-No.: 8160
•
2 m Audio extention cable
8 pin DIN socket to 8 pin DIN connector.
Order-No.: 8140
•
3 m Audio extention cable
8 pin DIN socket to 8 pin DIN connector.
Order-No.: 8150
•
RS232 Y-cable
To easily connect a GPS-receiver to the PTC.
Order-No.: 8060
•
RS232 connection cable
9 pin SUB-D connector (mail) to 9 pin SUB-D connector (female). Lenth 2 m.
Order-No.: 8040
•
USB to RS232 converter
For computers that only have an USB connector but no COM-port.
52