EN
EN
::: 9
Installation Instruction (continued)
8
Receiver
1. If you would like to put your
on the desktop, please
install the bracket as figure 1.
2. If you prefer to mount the
on the wall, please remove
the bracket and do the following steps as figure 2.
a. Install the two self-tapping screws at a distance of 60mm from
each other and located on a horizontal line.
b.
receiver
receiver
Slowly slide the unit down until it snaps into place.
Mounting
pins
Figure 1:
Figure 2
17
Chapter : Brightness
3
This function allows you to adjust the
(9 levels are
adjustable).
1.Press beneath
Menu
to display the main menu items.
2.Press
Up
or
Down
to choose
,
then press
beneath
Select
.
3.Press
Left
or
Right
to select the light level that you
like. Each time you press
Left
or
Right
, the receiver
displays with the selected light level.
4.Press beneath
Back
to save the settings and return to the
previous menu.
light level
Menu Description (continued)
Note:
Also, you can use
Up or Down key to adjust the
light level in the standby mode.
Installation Instruction (continued)
8
Receiver
1. If you would like to put your
on the desktop, please
install the bracket as figure 1.
2. If you prefer to mount the
on the wall, please remove
the bracket and do the following steps as figure 2.
a. Install the two self-tapping screws at a distance of 60mm from
each other and located on a horizontal line.
b.
receiver
receiver
Slowly slide the unit down until it snaps into place.
Mounting
pins
Figure 1:
Figure 2
17
Chapter : Brightness
3
This function allows you to adjust the
(9 levels are
adjustable).
1.Press beneath
Menu
to display the main menu items.
2.Press
Up
or
Down
to choose
,
then press
beneath
Select
.
3.Press
Left
or
Right
to select the light level that you
like. Each time you press
Left
or
Right
, the receiver
displays with the selected light level.
4.Press beneath
Back
to save the settings and return to the
previous menu.
light level
Menu Description (continued)
Note:
Also, you can use
Up or Down key to adjust the
light level in the standby mode.
Installation Instruction (continued)
Receiver
1. If you would like to put your on the desktop, please
install the bracket as figure 1.
2. If you prefer to mount the on the wall, please remove
the bracket and do the following steps as figure 2.
a. Install the two self-tapping screws at a distance of 60mm from
each other and located on a horizontal line.
b. Slowly slide the unit down until it snaps into place.
Figure 1
Figure 2
Mounting
pins