1
MOTORIZED PROJECTOR LIFT
MOD. SI-H XL 500
(version OCT-2021)
INSTALLATION MANUAL
Thank you for purchasing the new SI-H XL 500 Projector Lift.
The SI-H XL 500 is supplied with a set of components and accessories that make it suitable for installation for
the majority of standard AV applications, but note must be made of the restrictions that apply to the weight
capability of this unit and not exceeded.
BEFORE INSTALLING THE LIFT, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY. Please, always
keep these instructions so that anyone can read them when needed.
THE MANUFACTURER DOES NOT TAKE RESPONSIBILITY FOR ANY DAMAGE TO PROPERTY OR PERSONAL
INJURY IF THE PROJECTOR LIFT IS USED OUTSIDE OF RECOMMENDED SPECIFICATIONS OR IN CASE OF
INCORRECT INSTALLATION.
Before installing the projector lift, please read the following instructions carefully:
•
The projector lift must be used INDOORS ONLY.
INSTALLATION OF SI-H XL 500 PROJECTOR LIFT HAS TO BE CARRIED OUT FROM
QUALIFIED PERSONNEL ONLY.
•
IT IS FORBIDDEN TO STAY UNDER THE LIFT AND WITHIN A RANGE OF 3 MT. FROM THE
LIFT.
•
NEVER CONNECT MORE THAN ONE MOTOR TO THE SAME SWITCHER. USE THE
SUPPLIED REMOTE CONTROL ONLY.
•
IN CASE OF MAINTENANCE, UNPLUG THE POWER SUPPLY.
•
Please confirm that your projected image width will fit your screen from your proposed
mounting location prior to installation.
•
Incorrect use of the lift, including exceeding the maximum lifting weight, will be
dangerous. The manufacturer does not take responsibility for any damage o property or
personal injury if the lift is used outside of recommended specifications.
•
Incorrect use of the projector lift, including exceeding the maximum lifting weight of 95
kg., would be dangerous and invalidates the warranty.
•
This product uses a 230V AC Motor. DO NOT attempt to service the motor. Incorrect
servicing could lead to risk of electric shock.
•
For any repairing, please contact directly the dealer you purchased the unit from.
•
DO NOT try to disassemble the lift or to paint the structure, as these operations will
invalidate the warranty.
•
Half-yearly and yearly the screen winch system has to be checked. Please see check
register at page 8 of this document.
•
In addition to manufacturer inspection guidelines, we recommend you check your
countries own legal obligations for checking and testing of lifting equipment.
The manufacturer and his agents do not take responsibility for any damage to property
or personal injury if the winch is installed/used outside of recommended
specifications.
This product uses a 230 V AC motor. DO NOT attempt to carry out repairs to
the motor, there are no user serviceable parts.
Incorrect servicing could lead to risk of electric shock. In the event of a
fault, please contact the dealer /supplier you purchased the lift from.
Warranty is 24 months Return To Base.
The projector lift SI-H XL 500 is
certified.
