manualshive.com logo in svg

Scrambler Ducati 1100, Owner'S Manual

Share
Download
Scrambler Ducati 1100 Owner'S Manual Download Page 74

Refuelling

Never overfill the tank when refuelling. Fuel should

never be touching the rim of filler recess (1).
Warning

The fuel pressure inside the tank may, in extreme

cases, cause fuel to spray when opening the fuel cap.

Always open the fuel cap slowly and carefully during

the refill.

If you hear an audible hiss from the cap while

opening it, wait until the stop of the hissing before

opening it completely.

The sound is residual pressure escaping from the

fuel tank, therefore the stop of the hiss indicates

that there is no more residual pressure.

The situation described above is more likely in hot

weather conditions.

Attention

Use fuel with low lead content and an original

octane number of at least 95.

1

Fig 45

Fig 46

73

Summary of Contents for 1100























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands