SV600 Series User Manual 5 Operation and keyboard display
43
A2-01 to A2-05
Motor rated/voltage/current/frequency/speed
Model
parameters,
entered
manually
according to motor namplate
A2-06 to A2-20
Equivalent stator resistance, inductance, rotor
inductance, etc. which inside the motor
Self-learning parameters
5.2.2 Self-learning of motor parameters
The methods for the frequency inverter to obtain the internal electrical parameters of the
controlled motor are: rotation complete self-learning, static complete self-learning, static
self-learning and manual input of motor parameters, etc.
Self-learning method
Application
Self-learning effect
Rotation complete
self-learning
The application that the motor and the load
system can be easily separated
Best
Static complete self-learning
The motor is difficult to disengage from the
load and rotation learning is not allowed
Good
Static self-learning
The motor is difficult to disengage from the
load and rotation learning is not allowed
Poor
Manually enter parameters
If you have correct motor parameters
provided by the motor manufacture or the
inverter which has successfully performed
self-learning, please enter them into P1-00
to P1-10
Good
Note: Under vector control, when needing to change the carrier frequency of the inverter or replace the
frequency inverter, the control board of frequency inverter or the motor after performed motor parameters
self-learning, if the model of those parts also changes, please perform motor parameters self-learning again.