Brake hose
(yellow) always
in the
top hole
Use of foam tube
around both hoses
inside the down tube
to prevent rattling
Gear cable
(green) always in
the
bottom hole
Brake
Rubber guide
Cable exit
3.7mm zip tie
Gear
3.7mm zip tie
ENGLISH
ENGLISH
Head tube cable guide entries can be swapped from the left or right side depending on
preference and/or country of use.
•
CABLE ROUTING
The MY20 Gambler offers internal cable
routing, all these parts are available in one
kit. There are two options for the headtube
cable guides, blank and cabled, both come
suppled in the kit.
The headtube cable guides double as bump
stops for triple clamp forks, while these
will help prevent damage to the frame or
fork in the event of contact it cannot be
guaranteed.
•
WARNING
On fork bumpers and bash guards are
never 100% guaranteed to protect
the frame!
Foam tubing is available with SCOTT part number:
277026 - SCO Cable anti-rattle liner 90cm 20
Ensure the all cables are clear of the shock in all suspension positions.
•
PIVOT MAINTENANCE
The pivots and bearings on the SCOTT Gambler are easy to maintain.
If you have to change the bearings/bushes or pivots please consult your local SCOTT
dealer for the purchase and fitting of the kit as special tools and procedure is required for
disassembly and reassembly.
To prolong the life of your pivot bearings an external treatment with water repellent after
every bike wash will help repel excess water. We do not recommend heavy grease sprays
09 |
BIKE USER MANUAL |
GAMBLER 2020
GAMBLER 2020
| BIKE USER MANUAL
| 08
