1. The bin control is a device that senses light,
and must be kept clean enough so that they can
“see”. At least twice a year, remove the bin control
sensors from the base of the ice chute, and wipe
the inside clean, as illustrated.
2. The ice machine senses water level by a probe
located in the water reservoir. At least twice a year,
the probe should be removed from the reservoir,
and the tip wiped clean of mineral build-up.
3. Clean or replace the air cooled condenser
filter.Clean the air cooled condenser. Use a
vacuum cleaner or coil cleaner if needed.
Do NOT use a wire brush.
NME1254 & FME1504
June 2002
Page 16
ICE LEVEL
SENSORS
SLIDE IN
AND OUT
ICE CHUTE
SENSOR and CONDENSER MAINTENANCE
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.
