C1448, C1848, C2148 E Series
Remote Condenser Models - User Manual
February 2016
Page 3
Model Number Description
Example
• C1448SR-32E
• C=cuber
• 14=nominal capacity in 100s of pounds
• 48=nominal width of cabinet in inches
• S=cube size, S=small or half dice,
• M=medium or full dice
• R=condenser type. R=Remote
• 32=Electrical code. -32=208-230/60/1, -3= 208-
230/60/3
• E=series revision code. E=5th series.
Note: In some areas of this manual model numbers
may include only the first five characters of the model
number, meaning that cube size, condenser type and
voltage differences are not critical to the information
listed there.
Options:
There are several options available for field
installation. They include:
• Vari-Smart Adjustable ice level system
• Smart-Board Advanced feature control
Some installations require bin or dispenser adapters.
See the table below.
Standard bin applications – Adapter information
Model
BH900* or B948 BH1100,
BH1300 or
BH1600
C1448, C1848
or C2148
Direct fit, no
adapter needed
Adapter panels
included with
bin, no adapter
needed
*
If stainless steel Kbaffle3 has been installed, remove
it and replace with the original plastic baffle.
Other bins and applications:
Note the drop zone and optional ultrasonic sensor
locations in the illustrations.
Scotsman ice systems are designed and
manufactured with the highest regard for safety and
performance. They meet or exceed the standards of
UL and NSF.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the use
of any part and/or other components not specifically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specifications and
design are subject to change without notice.
December 2011
