9.0 AVAILABLE OPTIONS
This section will show some optional equipment that is available for the AL100U grinders.
9.1 ROLLER SUPPORT KIT
SEE FIGURE 21
Below is an image of P/N 04.00318 Roller Support Kit.
When grinding diameters are almost always smaller than 60mm (2.36") and machine will be subject to
heavy use, it is recommended that this kit is used. It replaces the "Support Axis" which is a solid metal
bar located in front of the deburring table (table shown in FIGURE 11) on top of the machine. The
reason for the
Roller Support Kit is that the smaller grinding roller diameters allows the belt to rub the
Support Axis more. The roller reduces heat and wear with the smaller diameters
To install this kit (4) holes need to be drilled and countersunk on the top of the machine underneath the
grinding belt. Please see the next page for a detailed explanation.
PAGE 37
FIGURE 21