�
...-12V Harness Ground
To Qi Module •
VEHICLE ASSEMBLY
7. Connect the provided power
!-harness according to the diagram
Black to Black
displayed under the Test Connection
on page 6 or see illustration on the
.....
(MQUSM)
right. Connect the female and male
12V power connectors first then
�
route the type-c connector to the
(pf��
designated slot created during the
Red to Red
preparation steps on page 6.
.....
"""12V Harness Power
8. Routing the type-c connector through
I::\
the pocket/Qi-bezel:
A. Pass the Type-C connector
through the hole created durring
preparation on the pocket.
B. Second, pass the connector
through the TAQ04 bezel.
C. Place direct-Qi bezel into the
pocket location.
9. Routing the type-c connector to the
MQUSM
Qi module:
A. Connect the Type-C connector to
the MQUSM.
B. Place the module onto Qi bezel
C. Re-install the pocket into place
using screws removed durring
disassembly.
Notes:
• Hide any excess wiring under the panels/
pocket before reassembling.
• Use the provided two-sided adhesives to
secure the panel/module from moving.
10.
Lastly, reassemble everything in
reverse order, then place your Qi
enabled device onto the TAQ04
assembly to charge your device.
Refer to LED Charging Status for
charging details (page 6).
"Phone NOT included
8
