PREPARATION
Once you have confirmed the modules working status, retrieve the pockeVshifter
panel removed during step 5 of the disassembly process, Next, follow the steps
below in the order shown to ensure the pocket modification is done correctly and
for best fit of the TAQ04 bezel.
CAUTION! DO NOT attempt to drill a hole while the pocket is still mounted to the vehicle.
PREPARATION STEP
A
Place TAQ04 Direct Fit bezel into
pocket panel
PREPARATION STEP B
Use a contrasting chalk or marker,
estimate and mark the hole location,
then remove Qi-bezel.
PREPARATION STEP C
Carefully make a hole large enough
to pass the USB type-c connector
through.
7