POWER UP &
BLUETOOTH
PAIRING
Follow these steps to power up and pair your
BTFREQ
to your mobile device.
1. Plug the
BTFREQ
into your car's 12V power socket.
2. Enter the
8/uetooth
settings in your
device and enable the
8/uetooth
function.
3. Your phone
will confirm
once
it
is
connected.
CONNECTING TO YOUR CAR'S STEREO
The
BTFREQ
has a small FM radio transmitter
that can broadcast to your car's stereo.
1. Find a weak station on your FM radio that
has no active broadcast signal.
2. Press the "CH" button
(A),
then turn the Multi-Function
Button/Knob left or right (B)
to tune the
BTFREQ
to match
the frequency of your FM radio (C).
3. If you experience interference you may
have entered an area where there is an
C
active broadcast signal on the station you
are tuned to. Repeat the above steps to find a different clear station.
Note:
Press "CH" button to change frequencies on
BTFREQ
(A).
OPTIONAL AUX OUT CONNECTION
FOR
NON-BLUETOOTH
DEVICES
Mobile devices without
8/uetooth
can be
connected to the BTFREQ through the AUX
OUT port using included 3.5mm audio cable.
