Hand programming of the GEO40A10 Alphanumeric pager
If necessary insert a battery. Now, press & hold
the ‘Read’ key to switch the pager on. It will start
to emit a series of beeps & you should, whilst
continuing to hold the ‘Read’ key, now also press
& hold the ‘Selection’ key.
Selection Left Right Read
key key key key
After a few seconds the password menu will be
displayed.
The default password is ‘
0000
’. Highlighted
digits will flash and can be changed in turn by
using the ‘Left’ or ‘Right’ keys. Confirm each
correct digit & move on to the next by pressing
the ‘Read’ key.
NOTE: ALL PAGERS ARE SHIPPED WITH
DEFAULT PASSWORD OF '0000'.
