3
section. Accessories must be securely attached to the device
and must be removed when not in use. Always disconnect
the power before fitting accessories.
• When using the external temperature sensor, the tip of the
measuring sensor must be at least 5-10mm from vessel’s
bottom and wall.
• The instrument can only be fully disconnected from the
main power supply by turning off the main or disconnecting
the plug.
• The voltage stated on the label must correspond to the
main power supply.
• Ensure that the main power supply cable does not touch
the hotplate. Do not cover the device.
• The instrument must only be operated by adults.
• Keep away from high magnetic fields.
2 Proper Use
The instrument is designed for mixing and/or heating
liquids in laboratories:
•
Do not use more than 2000 meters above sea level
•
Temperature between 0
℃
and 40
℃
•
Installation Type: Product is designed to connect the
indoor outlet, where voltage fluctuation is not more
than ±10% compared with normal.
•
Observe the minimum distances between multiple
units, and distances to the rear wall and above the
assembly (min. 100 mm).
Figure 1
This device is not suitable for using in residential areas or
other constraints mentioned in Chapter 1.
3 Inspection
3.1 Receiving Inspection
Unpack the equipment carefully and check for any damage
which may have arisen during transport. Please contact
manufacturer/supplier for technical support.
>100mm
>100mm
