Vers.:20220531ENG
10
4
Analyzer Operation
4.1 Turning the Analyzer On and Off
The power toggle button is located on the lower back side of the analyzer. Press and release
the button one time. The indicator light on the front of the analyzer will turn on and go into
“breathing” mode during the boot-up sequence. When initially powered, the analyzer will run
through a series of self-diagnostic checks. When boot-up is complete, the indicator light will
glow steady and the login screen will appear.
The analyzer should be powered down using . If a hard re-start is required, hold the power
button on the back of the analyzer in for 7 seconds.
4.2 Main Screens and Controls on the User Interface
Power
on/off
Check box is enabled on all
screens when required data
entry is complete
Keyboard appears when a
data entry field is selected