Scientific 5000 Series, Manual

Page: 80 / 360

6
– PC SOFTWARE
6-16
Version 1.23
MODEL 5000 SERIES MANUAL

Confirm the STI 5000 Series Firmware (5300HSW.EXE) is located on the
floppy disk.

With the STI PCW Interface Software running:
o
Use the “System”->”Load Firmware” menu selection.
o
A message will open confirming the STI 5000 Series Tester has a
486CPU installed;
click the “Yes” button.
o
A file selection box will open (only the file name 5300HSW.EXE is
allowed), highlight the firmware file and click the “open” button.
o
The firmware file is read into the PCW program (this takes
approximately 15 seconds).
o
A message box will open asking if the STI 5000 Series Tester
display indicates “STI Download…”,
confirm that the display DOES
NOT
indicate this and then click the “No” button.
o
Another message box will open (exactly like the previous one), again
confirm the STI 5000 Series Tester display DOES
indicate “STI
Download…” and then click the “Yes” button.
o
The firmware download will then proceed, taking approximately 3
minutes to complete.
o
The STI 5000 Series Tester display will indicate “restarting system”
and then the new firmware will load with the display showing the
same indications as when the tester is first powered on.
NOTE: if the display on the STI 5000 Series Tester shows “STI Download …” when
the tester is turned on, use this selection to reload the operating firmware into the
tester or see Section 7.1.4.
6.3.3.6 About
Provides PCW Version and copyright information. Click on the Release info line to
display custom options installed.
6.3.3.7 Printer Setup
Provides control for selecting the printer the PCW program will use and, depending
on the printer selected, viewing and changing the printer properties.
6.3.3.8 Exit
If there are any unsaved Test Programs, prompts user to save the Test Program. If
there are any unsaved changes to the system configuration, prompts user to save the
system configuration. Exits the STI PCW program.
6.3.4 Window
Allows for auto arranging of open windows. If many windows are open and one or
more are hidden from view, use one of the following menu items to arrange the
windows. All open sub-windows will be listed, with the active sub-window checked.
Click on the desired sub-window to make that the active sub-window.
6.3.4.1 Tile
Tiles all open windows.
6.3.4.2 Cascade
Cascade all open windows (probably the best to use).
6.3.4.3 Arrange All
Arranges minimized windows along the bottom of the main window.