Scientific 5000 Series, Manual, Page: 232 / 360

10
– PIN PROGRAMMABLE SCANNER
10-2
Version 1.23
MODEL 5000 SERIES MANUAL
Connection of Pin Programmable Scanner is as shown in Fig 10-1.
Figure 10-2 ADP-401A Connection Diagram
10.2 Programming
Programming the ADP-401A-8/16 Pin Programmable Scanner is accomplished in the
test program generator of the PCW software (see Section 6.6.6). Select the test
program or create a new test program adding the desired test steps. Click the ADP-
401 Scanner Plan Tab to view the current scanner settings.
Select the AP-401A-8 or ADP-401A-16 in the ADP-401 Style Box. Save the STI
Configuration (see Section 6.3.3.4). This setting will then become the default setting
each time a test program is opened or created.
Double click the desired test step to open the Pin Configuration box (see Figure
10-3). For each device pin, select the signal to be applied when the test step is run.
Repeat this process for each test step. Save the test program, this includes the pin
assignments for the ADP-401A-8/16.
NOTE: 0 indicates no assignment.
Figure 10-3 ADP-401A Scanner Tab