Scientific 500 R00, Installation, Operation And Care Manual, Page: 8 / 10

IT IS ESSENTIAL TO MAKE SURE THAT THE INCOMING
VOLTAGE IS THE SAME AS THE RATED VOLTAGE OF
THE OF THE UNIT AS FOUND ON THE SERIAL PLATE.
THE SERIAL PLATE IS LOCATED AT THE REAR OF THE
UNIT ADJACENT TO THE INCOMING CABLE ENTRY.
ELECTRICAL AND TECHNICAL INFORMATION
THE CONTROL COMPARTMENT OF THIS UNIT CON-
TAINS DANGEROUS VOLTAGES. MAINTENANCE AND
SERVICING REQUIRING THE REMOVAL OF ANY PAN-
ELS OR COVERS SHOULD BE DONE BY QUALIFIED
SERVICE PERSONNEL ONLY.
MODEL DESCRIPTION VOLTS
(V/Hz)
POWER
(WATTS)
500 HOTPLATE 300mm 230/50 1500
501 HOTPLATE 450mm 230/50 2000
502 HOTPLATE 600mm 230/50 3000
Part
No.
1 BODY ASSEMBLY
2 ELEMENT COVER
3 TERMINAL BLOCK
4 CABLE GRIP
5 POWER CORD
6 ELEMENT
7 TOP PLATE
8 ELEMENT CLAMP
9 230V ENEEGY REGULATOR
10 CONTROL PANEL FACIA
11 INSERT
12 PILOT LIGHT
13 CONTROL KNOB
14 BOTTOM COVER
15 LARGE RUBBER FOOT
Description
MODEL : LABORATORY HOTPLATE
MODEL CODE : 500
ACCESSORIES AVAILABLE
MODEL 513 -SAND BATH ATTACHMENT
MODEL DESCRIPTION ORDER CODE
500 SAND BATH ATTACHMENT 509
501 SAND BATH ATTACHMENT 510
513 SAND BATH ATTACHMENT 502
5 10