Scientific Industries TORBAL FB Precision Series, Instruction Manual, Page: 43 / 85

41
Instruction Manual
– FB and FC Series Force Gauges
12.3 Interface ( RS232, USB, Wireless)
1. To configure baudrates and other PC interface parameters, select Interface from the configuration menu and
press the Enter key
2. Select a desired port and press the Enter key. Use the navigation keys to select port parameters and press the
Enter key to save the settings. To change the transmission data format mode select Sending and choose a
desired sending mode.
Transmission data format mode
Normal Stable Result Required Stable weighing result is required before data is sent
No STB No Stability Required Result is sent as soon as the transfer data button is pressed.
Force Gauge does not wait for a stable result
Auto STB Automatic
Weighing result is automatically transferred from the force gauge
after it stabilizes (no push key required)
Remove Remove All Characters All none force result characters are removed. Force gauge sends
only numeric values. Date, Time, Unit of measure are removed.
Contin. Continuously Force measurement results are continuously transferred from
the force gauge always. (no push key and no stability required)
CONFIGURATION
1. Printout
2. Interface
3. LCD Settings
4. Time & Date
5. Keypad
6. Auto-Off
7. Battery
8. External Input
9. Firmware Update
10. Defaults
11. Exit
CONFIGURATION
1. Printout
2. Interface
3. LCD Settings
4. Time & Date
5. Keypad
6. Auto-Off
7. Battery
8. External Input
9. Firmware Update
10. Defaults
11. Exit
INTERFACE
1. RS-232C
2. USB
3. Bluetooth
4. Exit
INTERFACE
1. RS-232C
2. USB
3. Bluetooth
4. Exit
USB
1. Baudrate: < 115200, 57600, 38400, 19200, 9600 >
2. Bits: < 8, 7 >
3. Parity: < none, odd, even >
4. Sending: < normal, No STB, Auto STB, Remove >
5. Exit
USB
1. Baudrate: < 115200, 57600, 38400, 19200, 9600 >
2. Bits: < 8, 7 >
3. Parity: < none, odd, even >
4. Sending: < normal, No STB, Auto STB, Remove >
5. Exit