Scientific Industries TORBAL FB Precision Series, Instruction Manual, Page: 28 / 85

26
Instruction Manual
– FB and FC Series Force Gauges
3. To begin measurement, align the force gauge shaft to the object measured. If measuring by hand grasp the
device firmly. For compression push the force gauge forward with the attached tip pressing into the object. For
tension wrap the hook tip around the object and pull the force gauge away from the object.
4. Use the START key to begin acquiring force measurements.
5. Once the measurement time is reached, the force gauge will conduct a statistical analysis which is automatically
displayed on the screen.
9.4 Fill Meter
1.
To enable the Fill Meter use the navigation keys to select Fill Meter in Applications folder and press ENTER.
REM. TIME = 0.0 s
ACQ AUT SDM
5.00 N

- +

REM. TIME = 0.0 s
ACQ AUT SDM
5.00 N

- +

APPLICATIONS
1. Standard Mode
2. Peak Mode
3. Multi Peak
4. Fill Meter
5. Exit