manualshive.com logo in svg

Scientek SW6000 Series, Operating And Maintenance Manual, Page: 30 / 103

Share
Download
Scientek SW6000 Series Operating And Maintenance Manual Download Page 30

Operating and Maintenance Manual 
Scientek Washer Model SW-6000 

 

Revision-3, Sept. 2007 

 

5-5

5.2.3 Status Indication: 

 

Cycle Indicator:     

 

The Cycle Indicator shows the cycle that has been selected or currently running. 
 
Step Indicator: 
The Step indicator graphically presents progress of the cycle execution and the result for each 
step. 

  

 
 

Before any cycle is started the indicator will show all steps in black/white. 

 
 
 
 
 
 

When the cycle has been started the steps that have time set to zero will be 
blanked out, and the step that is being executed will flash green with white 
letters.  

 
 
 
 

 
 

As the cycle execution progresses the completed steps’ indication will become 
steady green with black letters. The  

  marks that the respective step has the 

temperature guarantee set. If the temperature guarantee set point has not been 
attained within the specified time the step indication will become flashing red.  
(

) 

 
 

 

Stage Indicator:  

 

  

The Stage Indicator provides information regarding the step 
currently being executed. It shows what is the current action, 
the preset and remaining time for that action and the preset and 
current temperature reading for the step in progress. 
The information on the stage indicator changes as the operation 

advances through the respective step. 

 
 

Scientek Technology Corporation 

 

Tel:  (604) 940-8084 

7943A Progress Way, Delta, BC V4G 1A3 

 

Fax:  (604) 940-8085 

Summary of Contents for SW6000 Series








































































































Reviews:

No comments