MAGIC PENNY BOX - INSTRUCTIONS
Step 1:
Start with side A (A) and insert
one of the clips (I) into the slots with
the square marking as shown.
Step 3:
Insert the other clip (I) into
side B (B) where the square marking is
located as shown.
Step 2:
Connect side A (A) with the
box face (E) so the A markings are
aligned as shown.
Step 4:
Attach side B (B) to the rest
of the box, by connecting the slots
marked “B” as shown.
Step 5:
Insert the magnet piece (H)
into side C (C) with the magnet facing
upwards.
Step 6:
Attach side (C) to the rest of
the box.
A
B
C
I
E
F
H
G
D
A -
Side A
B -
Side B
C -
Side C
D -
Side D
E - Box
Face
F -
Magnet Wall
G -
Keyhole Wall
H -
Magnet Piece
I -
Clips (2)
J - Keys (2)
Prep:
• Lay out your pieces so you can easily identi-
fy them.
• Use markers or paint to decorate the vari-
ous parts to personalize your box.
• We recommend coloring the pieces before
assembling the locomotive.
Additional Information
1. You can use wood glue to secure the parts if
necessary. Dispense small amounts of glue.
Masking tape will help secure the pieces
while the glue dries.
2. Your penny box has been laser cut on ply-
wood which is not always uniform in width.
Consequently some pieces may fit more
tightly than others.
3. Use sandpaper to sand down parts if the fit
is tight.
J
