Assembly 3
21
21
ATTAch The seAT
❶
Unlock the seat post quick-release lever.
Figure 3.7
❷
Move the height of the seat up or down until the rider feels
they have control of the bicycle and are comfortable (see
Section 1: Seat Height and Handlebar Reach
).
Important! Be sure the
minimum insertion marks
do not go
past the quick-release clamp and are
not
visible.
❸
Close the quick-release lever and lock the seat in place. If
there is not enough force to hold the seat in place open the
quick-release lever, hold the base and turn the lever
clockwise until you have sufficient force and the seat cannot
move.
❹ Check the seat does not move.
Note:
Riders weight including luggage should not exceed
230 lbs. (105 kg).
Improperly adjusted seat height could affect the rider’s ability
to reach the handlebar and pedals may result in an unexpected
movement, loss of control, and serious injury or death. Follow
these guidelines when adjusting the seat height. Always
ensure the seat post
minimum insertion marks
is below the
quick-release seat clamp and
cannot
be seen. Ensure the seat
clamp is locked and the seat cannot move.
WARNING!
Figure 3.7
Minimum
insertion marks on
the seat post
Seat post
Quick-release
seat clamp
2
1
3
Minimum
insertion
marks
Schwinn Folding Bicycle Manual.indb 21
7/1/14 3:59 PM
