Schwing SP 1800-D, Original Operating Instructions

Page: 107 / 390

3.1 Requirements for special work
As the operator, it is your responsibility to provide all the necessary
information to the personnel involved before special work or mainte‐
nance work is carried out. Someone should be nominated as the per‐
son responsible for this.
Carry out the maintenance and inspection operations and comply with
intervals specified in the Operating Instructions, including specifica‐
tions for the replacement of parts and equipment. These tasks may
only be carried out by qualified personnel.
Workshop equipment appropriate to the task in hand is absolutely
necessary for the execution of maintenance work.
If changes have been made to the machine, it must be checked by a
subject expert before recommissioning.
Secure a wide area around the maintenance area as far as is neces‐
sary.
A machine that has been completely shut down for maintenance and
repair work must be secured to prevent it being restarted inadvertent‐
ly:
● Lock the main control devices and remove the key.
● If a main switch is fitted, attach a warning plate to it.
Only carry out maintenance work if the machine is parked on level
and sufficiently supporting ground and is secured to prevent it rolling
away.
Use specially designed or otherwise suitable climbing aids and work‐
ing platforms when carrying out assembly work above head height.
Never use machine parts as climbing aids. Keep all handgrips, steps,
railings, platforms and ladders free from dirt, snow and ice.
Carefully secure individual parts and large assemblies to lifting equip‐
ment when carrying out a replacement operation. Use only suitable
and technically perfect lifting equipment and suspension systems with
adequate lifting capacity. Never stand under suspended loads.
Attachment of loads and signalling to crane operators should only be
entrusted to experienced personnel. The signaller must be within vis‐
ual range of or in voice contact with the crane operator.
Observe national regulations when working with lifting equipment.
Safety Manual
Concrete delivery and placing machines
01/2018 Rev16 EN
59