Your Safety
B E F O R E I N S TA L L AT I O N
1.
We recommend that this rangehood be
installed or repaired by a qualified Home
Appliance technician.
2.
Please see our website
www.schweigen.com.au
for experienced installers.
3.
It is dangerous to modify any part of this
appliance. Modification of any kind, will
void the warranty.
4.
The manufacturer declines all responsibility
in case of failure to adopt proper safety
measures.
5.
Ensure that the location of the rangehood has
good ventilation.
6.
Please consult state and federal regulations
regarding installation of the rangehood and
ducting.
7.
Schweigen Home Appliances will not be
responsible for installations executed by non-
qualified installers and installations that fail to
meet legislation requirements.
8.
Any electrical work required to install this
rangehood should be carried out by a qualified
Electrician.
9.
This appliance must be connected to an
electricity supply with a ground connection.
10.
The electrical technical data can be found
inside the rangehood, after removing the
grease filters.
11.
The flexible power cable supplied is already
connected internally and emerges from the
rangehood near the air outlet tube.
12.
Before installing the electrical connections,
you should:
– Always switch off power using the double-
pole switch before maintenance and turn
the power on again for normal use only
when the maintenance has been completed.
– Verify that the indicated electrical data
coincides with the voltage values and
frequency of the electrical circuit in
the house where the rangehood is to
be installed.
– Check that the premises has electrical
protection against short circuits and
electrocution, pursuant to the applicable
legislation.
MSQX90
Rangehood & Installation Guide
5