Schwarz SB10B, Operating Instructions Manual, Page: 78 / 96

78 8 Spare parts and circuit diagrams
8.8 Mechanical spare and wear parts width adjustment
When placing the order, please indicate item number and machine number.
Schwarz GmbH
Engineering
Freiburgerstr. 3b
79822 Titisee-Neustadt
Phone : 0049 7651/5770
Fax: 0049 7651/3770
Email: mail@schalungsreiniger.de
Homepage: www.schalungsreiniger.de
Table 8.7 Spare and wear parts width adjustment
Preview Component num-
ber Description Features
Item no.001 034 Helical worm-geared motor
Output = 1.5kW
Turns = 282/min
Width adjustment
with rotary encoder
Item no.005 038 Sprocket
Inner diameter = Ø25
Number of teeth = Z18
Width = 50 Width adjustment
Sprocket drive
Item no.005 053 Sprocket f. drive shaft side adjust-
ment
Inner diameter = Ø30
Number of teeth = Z18 Width adjustment
Item no.005 402 Steel bevel wheel
20 teeth Width adjustment
Height adjustment
Longitudinal shafts & trans-
verse shafts
Item no.007 062 Roller chain f. drive shaft
Width adjustment
5/8" x 3/8"
Length = 600 Width adjustment
Item no.011 052 Pedestal bearing UCP 206 Ø 30
Inner diameter = Ø30
Width adjustment
Item no.011 202 Deep groove ball thrust
bearingAxial-Rillenkugellager
Outer diameter = Ø42
Inner diameter = Ø25 Width adjustment, among
others
Item no.012 028 Threaded rod M20
M20x220 Width adjustment