Assembly
54
03.00|WDP-5X |en
Compressed air supply
The compressed air is supplied to the clamping systems via
conventional compressed air tubes of nominal size 4 mm.
The compressed air tubes can be reinforced with separately
available tube protection sleeves made of stainless steel to protect
them from hot splinters. The tube protection sleeves are available
in three prepared lengths and can be cut to length. With the
enclosed heat-shrink tube, the tube protection sleeve is fixed and
stuck for connection coupling (see "Preparing the air connector
plug" illustration).
To make a heat-resistant air connection plug, a metal cutter and a
hot air blower are required.
Preparing the air connection plug
5.9
