Assembly
03.00|WDP-5X |en
41
WDP-5X-DSM 99-70-M
Manual workpiece direct clamping module WDP-5X-DSM 99-70-M
forms the change interface to the workpiece or the clamping
pallet. It can be positioned as the top clamping system on the
WDP-5X clamping pillar via the change interface.
The clamping function of the clamping system is driven manually
using rotary movement on the actuator screw on the side of the
housing. The clamping system can be operated by means of a
hexagonal screwdriver (angled pin wrench). The clamping force is
initiated according to the precise torque specification using a
torque wrench. No air supply is required for operation of the
clamping system.
The clamping system also has a workpiece monitoring function,
with which whether the work surface of the workpiece or the
clamping pallet is flat can be monitored via a differential pressure
switch (see chapter "Function of the workpiece monitoring
function"
Mounting and connection WDP-5X-DSM 99-70-M
5.3.6
