Assembly
44
02.00|WDB 99 |en
Compressed air supply
The compressed air is supplied to the clamping systems via con-
ventional compressed air tubes of nominal size 4 mm.
The compressed air tubes can be reinforced with tube protection
sleeves made of stainless steel to protect them from hot splinters.
The tube protection sleeves are available in three prepared
lengths and can be cut to length. With the enclosed heat-shrink
tube, the tube protection sleeve is fixed and stuck for connection
coupling (see "Preparing the air connector plug" illustration).
To make a heat-resistant air connection plug, a metal cutter and a
hot air blower are required.
Preparing the air connection plug
Type
ID no.
Length
Tube protection
1313147
5 m
Tube protection
1313148
10 m
Tube protection
1313149
15 m
5.9
