Assembly
02.00|WDB 99 |en
41
Clamping pins with position balancing SPD-B, SPD-C
The clamping pins have a movable clamping element which can be
compensated to flexible bore hole fluctuations.
The clamping pin SPD-B satisfies the function of a sword pin and
allows a position balancing in the longitudinal direction of ± 1 mm.
For the use of the SPD-B, a fit seating in the installation space is
required.
With the SPD-C clamping bolt, concentric positioning tolerances
can be compensated. These clamping pins can be combined with
all other VERO-S clamping pins within a workpiece interface. By
using these clamping bolts, the workpiece clamping runs smoothly.
5.6
