Assembly
02.00|WDB 99 |en
33
WDA 99-79 D32
The WDA 99-79 D32 compensation module is intended for individu-
al height adjustment to the workpiece in connection with the WDA-
SPA 32 direct clamping pin workpiece. It forms the flexible change
interface to the workpiece or the clamping pallet. A cylindrical
clamping pin can be fixed with this up to a certain extension limit.
This compensation module fulfills the function of a centering pin
similar to a VERO-S SPA 40RF clamping pin. This compensation
module is preferably only to be used once in the entire clamping
structure, as otherwise it may cause redundancies in the clamping
structure. One of the remaining clamping pillars should be equipped
with clamping systems for a VERO-S SPB 40RF clamping pin with
compensation function in longitudinal direction (sword pin). All
other clamping pillars may be loaded with SPC 40RF clamping bolts.
The compensation module can be positioned as the top clamping
system on the WDB 99 clamping pillars via the change interface.
The clamping system has a hydraulic clamping unit and is clamped
or loosened using a hexagonal socket screwdriver. The change
interface is suitable for the WDS 99 stacking modules.
An upcoming compressed air supply from the stacking modules is
closed via the integrated sealing elements in the compensation
module and disabled. For orientation of the installation position,
a cylindrical pin grips into the interface to be inserted.
Mounting and connection WDA 99-79 D32
5.3.7
