Basic safety notes
• Observe the current safety, accident prevention and
environmental protection regulations regarding the product's
application field.
2.9 Transport
Handling during transport
Incorrect handling during transport can make the product unsafe
and risk serious injuries and considerable material damage.
• When handling heavy weights, use lifting equipment to lift the
product and transport it by appropriate means. The scope of
delivery includes eye bolts for transport. The eye bolts are
intended for transporting the clamping station without the
clamping attachment and must be removed after assembly of
the clamping station.
• During transport and handling, secure the product to prevent it
from falling.
• Do not walk under suspended loads.
2.10 Malfunctions
Behavior in case of malfunctions
• Immediately remove the product from operation and report the
malfunction to the responsible departments/persons.
• Order appropriately trained personnel to rectify the
malfunction.
• Do not recommission the product until the malfunction has
been rectified.
• Test the product after a malfunction to establish whether it still
functions properly and no increased risks have arisen.
2.11 Disposal
Handling of disposal
Incorrect handling of disposal can make the product unsafe and
risks serious injuries and considerable material and environmental
harm.
After decommissioning, place the clamping station in a position
that enables any liquids to drain out.
• Collect the escaping liquids and dispose of them properly in line
with the statutory provisions.
• Follow local regulations on dispatching product components for
recycling or orderly disposal.
• Dispose of the clamping station's metal parts as scrap metal.
Alternatively, you can return it to SCHUNK for proper disposal.
11
02.00 | NST3 | VERO-S quick-change pallet system | en | 1344366
Summary of Contents for VERO-S NST3 400-250
Page 43: ......
