SCHUNK VERO-S NSR 138, Translation Of Original Operating Manual

Page: 7 / 60

Basic safety notes
2 Basic safety notes
Improper handling, assembly and maintenance of this product
may result in risks to persons and equipment if this operating
manual is not observed.
Report any failures and damage immediately and repair without
delay to keep the extent of the damage to a minimum and prevent
compromising the safety of the product.
Only original SCHUNK spare parts may be used.
2.1 Intended use
The VERO-S robot coupling is intended for pallet handling with a
robot or similar appropriate technical devices. It is intended for
automatic loading of tool machines or other appropriate technical
devices.
The product may only be used on the basis of its technical data.
The specified maximum technical data must not be exceeded
during use.
The product is designed for industrial use.
To use this unit as intended, it is also essential to observe the
technical data and installation and operation notes in this manual
and to comply with the maintenance intervals.
2.2 Not intended use
The VERO-S robot coupling for pallet handling is not being used as
intended if, for example:
• It is used as load handling or lifting equipment.
• it is used for turning applications without consulting SCHUNK.
• It is used as a quick-change pallet system for milling applications
without consulting SCHUNK.
• It is used in working environments that are not permissible.
• People work on machines or technical equipment that do not
comply with the EC Machinery Directive 2006/42/EC,
disregarding the applicable safety regulations.
• The technical data specified by the manufacturer for using the
robot coupling and the pallet coupling is exceeded.
2.3 Notes on particular risks
• Disconnect the power supply lines and ensure that there is no
residual energy in the system before performing assembly,
modification, maintenance, or adjustment work.
• Do not move parts by hand when the energy supply is
connected.
7 01.00 | NSR 138 / PKL 138 | VERO-S Robot Coupling for Pallet Handling | en |
1509378