Assembly
16
04.00|1400904 NSP 140, NSP-S 140 |en-US
Assembly
Actions before starting assembly
Lift the quick-change pallet system carefully out of the packaging.
CAUTION
Risk of injury due to sharp edges and rough or slippery surfaces
•
Wear personal protective equipment, particularly protective
gloves.
Check that the delivery is complete and that there is no transport
damage.
Assembly, dismantling and modification work on the quick-change
pallet system may only be carried out by specialist personnel.
Disconnect the power supply lines and ensure that there is no
residual energy in the system before performing assembly,
modification, maintenance, or adjustment work.
Wear protective equipment (gloves, protective shoes).
WARNING
Risk of injury due to dropping the quick-change pallet system
during transport
•
Transport with care.
Use a crane and/or a trolley for transporting the system.
CAUTION
Risk of injury due to crushing.
•
Install the quick-change pallet system carefully.
•
Do not place any limbs into the gaps or between the clamping
station and the machine.
•
Wear protective gloves.
6
