Basic safety instructions
04.00|1400904 NSP 140, NSP-S 140 |en-US
11
Personnel qualification
Only qualified specialist personnel with the relevant safety training
may install, remove, commission, operate or maintain the VERO-S
quick-change pallet systems.
All persons charged with operating, maintaining and repairing the
system must have access to the operating manual, especially the
chapter "Basic safety notes".
Trainees may work on machines and technical equipment in which
a quick-change pallet system is installed, provided that they are
supervised at all times by qualified specialist personnel.
Organizational measures
Obeying the rules
The operator must employ suitable organizational measures and
instructions in order to ensure that the relevant safety rules are
obeyed by the persons asked to operate, maintain and repair the
product.
Monitoring the behavior of personnel
The operator must at least occasionally check that the personnel
are behaving in a safety-conscious manner and are aware of the
potential hazards.
Danger signs
The operator must ensure that the signs concerning safety and
hazards on the machine where the product is mounted are clearly
legible and are observed.
Faults
If a malfunction occurs in the product and endangers safety, or if a
problem is suspected due to production behavior, the machine on
which the product is mounted must be stopped immediately and
remain shut down until the malfunction has been located and
remedied. Only allow specialists to remedy malfunctions.
Spare parts
Only use original SCHUNK spare parts.
Environmental regulations
The applicable environmental regulations must be observed for all
maintenance and repair work.
2.5
2.6
