SCHUNK VERO-S NSE3-A3 138, Assembly And Operating Manual

Page: 16 / 52

Product description
16 05.00 | NSE-A3 | VERO-S quick-change pallet system | en | 1376941
3 Product description
3.1 Description of design and version
Clamping module
type Equipment
Torque
pin V4 Cone
seal Media
transfer unit
NSE-A3 138 - X -
NSE-A3 138-V4 X X -
NSE-A3 138-V4-P X X Hydrokomp
NW3
NSE-A3 138-V4-P1 X X SWS
3.2 Technical data
Designation
Type ID Holding force*
(M10 / M12 / M16) Pull down
force
without turbo Pull down
force
with turbo
NSE3-A3 138 1364306 35 kN / 50 kN / 75 kN 8 kN 28 kN
NSE3-A3 138-V4 1364307 35 kN / 50 kN / 75 kN 8 kN 28 kN
NSE3-A3 138-V4-P 1351708 35 kN / 50 kN / 75 kN 8 kN 28 kN
NSE3-A3 138-V4-P1 1339726 35 kN / 50 kN / 75 kN 8 kN 28 kN
NSE3-A3 138,
all variants Dynamic pressure
monitoring
Clamping slide Clamping slide position
clamped (hose-free
direct connection) Clamping slide position
opened (hose-free
direct connection)
NSE-A3 138, all
variants Clamping taper
blow-out function Cleaning of the change interface, connection
M7
NSE-A3 138-V4 (-P /
-P1) Blow-out torque pin
(and media transfer
unit) Cleaning the torque pin (and media transfer
unit), connection G1/8" or hose-free direct
connection
NSE-A3 138, all
variants Dynamic pressure
monitoring / blow-
off internal bearing
surface Pallet presence or cleaning of internal bearing
surface, connections G1/8" or hose-free direct
connection
NSE-A3 138, all
variants Dynamic pressure
monitoring / blow-
off external bearing
surface Pallet presence or cleaning of external bearing
surface, connections G1/8" or hose-free direct
connection
* Holding force when fastening the clamping pin with
cylindrical screw – DIN EN ISO 4762/12.9